You Are Here: Home » Autocad
Controlling UCS for Angled Drawing and Local Coordinates
If you already familiar with 3D modeling in AutoCAD, then you must be familiar with controlling coordinate system. The coordinate system you define will be a UCS (User Coordinate System). In 2D, there are many things that you can do by controlling coordinate...
AutoCAD Precise Input: Drafting Tools
You have learned how to precisely specify points by their coordinates. However, sometimes we need other methods to define points. There are some drafting tools that we can use to help us in specifying points. AutoCAD Object Snap Object snap is a tool...
AutoCAD Precise Input: Specifying Point Coordinate
You have learned how to use AutoCAD drawing tools. When you activate an AutoCAD drawing tool, there are two possibilities what AutoCAD will ask you: options or specifying points. Some AutoCAD tools ask your confirmation for settings before asking you...
Using Template and Setting Your Unit
There’s not much in this tutorial. However, I consider this is very important part for the rest of the tutorial. I found most AutoCAD users never aware about using template. And worse, sometimes they just open existing drawing, erase the drawings,...
Accurate Input in Autocad
Now it’s time to see if you were paying attention in the first lesson. In this lesson you will complete the drawing that will test your knowledge of drawing accurately using different types of precision input. Clients...
Introduction to Object Snaps
Introduction The Object Snaps (Osnaps for short) are drawing aids which are used in conjunction with other commands to help you draw accurately. Osnaps allow you to snap onto a specific object location...
ASSIGNMENT 1 INTRO TO DRAWING & MODIFYING
AutoCAD allows you to have access to a large number of commands. The general rule is that you will use 20% of the commands 80% of the time. We will start by introducing...
