5th Class Examination Result 31 March 2012

Punjab Education Commission (PEC) Will Announce The 5th & 8th Grade Examination 2012 Result Of All Districts Today On 31st March, 2012 at 08:00. All Students Of 5th & 8th Grade Of All Districts Can Check Their Result On Our Site (www.geomaza.com)or...

8th Class Examination Result 31 March 2012

Punjab Education Commission (PEC) Will Announce The 5th & 8th Grade Examination 2012 Result Of All Districts Today On 31st March, 2012 at 08:00. All Students Of 5th & 8th Grade Of All Districts Can Check Their Result On Our Site (www.geomaza.com)or...

Controlling UCS for Angled Drawing and Local Coordinates

If you already familiar with 3D modeling in AutoCAD, then you must be familiar with controlling coordinate system. The coordinate system you define will be a UCS (User Coordinate System). In 2D, there are many things that you can do by controlling coordinate...

AutoCAD Precise Input: Drafting Tools

You have learned how to precisely specify points by their coordinates. However, sometimes we need other methods to define points. There are some drafting tools that we can use to help us in specifying points. AutoCAD Object Snap Object snap is a tool...

AutoCAD Precise Input: Specifying Point Coordinate

You have learned how to use AutoCAD drawing tools. When you activate an AutoCAD drawing tool, there are two possibilities what AutoCAD will ask you: options or specifying points. Some AutoCAD tools ask your confirmation for settings before asking you...

Using Template and Setting Your Unit

There’s not much in this tutorial. However, I consider this is very important part for the rest of the tutorial. I found most AutoCAD users never aware about using template. And worse, sometimes they just open existing drawing, erase the drawings,...

Accurate Input in Autocad

Now it’s time to see if you were paying attention in the first lesson. In this lesson you will complete the drawing that will test your knowledge of drawing accurately using different types of precision input. Clients...

Introduction to Object Snaps

              Introduction The Object Snaps (Osnaps for short) are drawing aids which are used in conjunction with other commands to help you draw accurately. Osnaps allow you to snap onto a specific object location...